Pioneer GM-5400T võimendi

GM-5400T

Designed to fit both cosmetically and technically with our subwoofers, the GM-5400T gives you total installation freedom and no distortion.

With an H-shaped chassis for vibration control and a PWM regulated power supply, you can drive multiple speaker channels or subwoofers and turn your in-car audio experience into the sound staging environment you’re looking for.

Use the ‘Related’ tab above to browse our recommended sub pairings with this amplifier.

• Maximum Output Power 2 x 250W or 1 x 760W (4Ω)

• CEA 2006 Power (THD + N = 1%) 125 W RMS X 2

• Continuous power output (RMS) • 14.4V (20Hz-20kHz/4Ω): 2 x 125 W/1 x 380W (bridged)
  • 14.4V (20Hz-20kHz/2Ω): 2 x 190W

• Load impedance capability 4Ω

• Frequency response (+0dB , -1dB) 10Hz ~ 50k Hz

• Distortion < 0.03 %

• S/N ratio > 95  dB

• Bass Boost 50 Hz; 0/6/12 dB

• LPF 80 Hz (-12 dB/oct)

• RCA terminals Yes (input)

• Speaker Terminals Screw-type

• High Voltage Input (+) 200 mV - 6.5 V

  All of our bridgeable amplifiers have an Input Level Control, which is adjustable over 6.5 volts of input signal. This means that all our amplifiers pick up signals from Hi-Volt headunits of line drivers, without any clipping.

• Input level control 0.8 - 26 V

• Max. current consumption (A/4Ω) 30 A

• Chassis size (W x H x D) 265 x 62 x 346 mm

• Unit weight 3,8 kg